Airbags 101: When You Need an Airbag Module Reset

on
Categories: Airbag Module Reset

The dealership told you that you need a new module?

At MyAirbags, we reset ALL fault codes.  After
you receive the module from us you will not have to take it to the dealer for
any additional programming. All airbag control modules can be reset and reprogrammed,
except if flood, fire or hardware damage.

The dealer and/or scan tools will not be able to clear hard code due to hardware
issues and will offer to sell you a new replacement airbag module that usually
cost around $180 to $600 depending on the vehicle.

Using MyAirbags Reset Services will save you 100s of Dollars!

Even after small accident codes will be stored in the module.

This is a Reset and Return service of your existing Airbag Control Module. You will need to remove and send your module to us for reset. 

MyAirbags resets ALL airbag module fault codes.

Reset Airbag Module Codes at MyAirbags

It is crucial to have your vehicle’s airbags replaced or airbag module reset
following an accident. Many car dealerships must place special orders to replace
airbag modules, which greatly increases the replacement cost.

At MyAirbags, we don’t need to outsource repairs and we reset your original airbag
control module in-house with IPC-Certified electronics technicians.

MyAirbags-Airbag-Module-Airbag-Reset-Mazda3-Mazda6-2013-2014-2015-2016.jpg

 

 

Was your vehicle involved in an accident?

Is your airbag light on?

If you answered yes to either one of the questions above, your airbag module
needs to be reset.

Airbag Module Reset & Return (Like New, Only Better)

After a vehicle has been in an accident, the airbag control module needs to be
reset in order to be used again. If you don’t have the module reset, you run
the risk of being in an accident without a working airbag system for protection.

The IPC Certified technicians at MyAirbags can reset your original airbag module.
Once repaired, it will not need to be coded to your
vehicle VIN, since it is original and came out of
your vehicle.

 

 

 

Here is a sample of what an airbag control module looks like:

 MyAirbags-Airbag-Module-Airbag-Reset-GMC-Chevy-Buick-Cadillac-2007-2010.jpgMyAirbags-Airbag-Module-Airbag-Reset-GMC-Chevy-Buick-Cadillac-2010-2017.jpgMyAirbags-Airbag-Module-Airbag-Reset-Ford-Lincoln-1.jpg MyAirbags-Airbag-Module-Airbag-Reset-Dodge-Chrysler-Jeep-1.jpg 

Accessing the Vehicle’s Airbag Control Module

To ensure your safety when removing and installing your airbag module, MyAirbags
provides these simple tips:

Removing the Airbag Module

  • Disconnect the positive lead on the battery and wait three minutes
  • Locate the SRS computer module, which is often located directly below the
    center console between the front two seats.

    • In GM vehicles, the SRS computer module is typically found under
      either the driver or passenger seat, while in other vehicles it may
      be found near the floor in the center of the dash.

Installing the Airbag Module

  • Ensure proper connections of all SRS components, including clock springs,
    airbags, impact sensors and seat belts.
  • Disconnect the battery cables, and carefully insert the reset airbag control
    module.
  • Connect the airbag control module wiring plugs. Make sure module is bolted
    down. If not bolted down the airbags and seat belts may deploy
  • Re-connect the battery after securing the airbag module.

Why You Want MyAirbags to Service Your SRS Module

High quality, cost-effective solutions at MyAirbags provide airbag control module
resets for
all vehicle makes and models from 1995 and up.

The auto repair technicians at MyAirbags solve airbag issues that may keep the
airbag light on, such as clearing hard and soft codes and resetting the airbag
module. These are important safety features that should not be overlooked following
an accident in which the airbags deployed. Our airbag module reset services restore
the module back to factory settings.

Our service is 100% guaranteed or your money back.

No need to replace your airbag control module unless it has been in water flood
or fire damage. Send your original module to us for reset and save hundreds!

Start your order today!