myairbags.com
888-779-9029I received my airbag module back and the airbag light is still on. What do I do?
I received airbag control module back and still have issues? When you get airbag module back from us it will be clear of all codes. Airbag module installation
- All repairs need to be done first and airbag module installation is last.
- Disconnect battery cables.
- Wait 3 minutes before installing the airbag module in the vehicle.
- Bolt down module with all bolts and then connect harness plugs.
- Vehicle needs to be flat on the ground. Not elevated on a jack or lift.
- Reconnect battery cables.
- The system will run an internal cycle test on each component, such as: airbag, seat belt, sensors.
- If all is good and functioning correctly the airbag light will turn off within 10 seconds.
- Check to make sure the airbag control module is bolt it down with all bolts.
- Check harness plug connector to be sure no pins are bent. If pins are bent they can short the module or communication signal
- Was the car flood damaged or recovered from a fire? If so, you will continue to face a host of problems that can not be solved by our services.
